Catalog

POLY-A

Boat Size-6 Meter to 8 Meter, ( Model boat principle dimension 7.5 x 2.6 x 1.2 Meter & Engine SABB, HP-30) including engine,SABB/LISTER/BUKH VOLVO PENTA DIESEL ENGINE,HP- 30, Reverse gear, Cooling-water cool, Starting-Electrical starting system(sanded, painted & fully working condition) Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Polished propeller

# Stainless steel steering wheel or combined wheel (stainless steel & wood) with manual cable

# Seat high from Ground: Standard or as per buyer instruction

# High of Back- Standard or as per buyer instruction

# Sundeck size: Standard size or as per buyer instruction

# Rear deck Size: Standard size or as per buyer instruction

# Cool Box Size-standard or as per buyer instruction

# On bottom removable wooden floor, vertical door made by wood

# Engine box Made Polyester (Isolated)

# Wheel Stand Made by polyester

# Sundeck Made By Polyester

# Rear Deck Made by Polyester,

# Seat made by Polyester

# Teak wood side & top side of the boat edge.

# Box Under Sundeck

# Box under rear Deck

# Boxes under seat for Battery, Fuel Tank, cool box ( opening top side) & another 4 Boxes ( opening inside) for some thing else with Lock & keys

# Inside & outside of the boat well sanded & painted: color- as per buyer instruction

# Pillows on sundeck, rear deck & seating area .Fabric- as per buyer instruction

# Packing-seaworthy packing by 40ft HC Container  

TEAK-C

Boat Size-6 Meter to 8 Meter, ( Model boat principle dimension 7.3 x 2.42 x 1.0 Meter & Engine YANMAR, HP-30) ) including engine,SABB/LISTER/BUKH/VOLVO PENTA DIESEL ENGINE, HP- 30,  Reverse gear, Cooling-water cool, Starting-Electrical starting system(sanded, painted & fully working condition) Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Polished propeller

# Stainless steel steering wheel or combined wheel (stainless steel & wood) with manual cable

# Seat high from Ground: Standard or as per buyer instruction

# High of Back- Standard or as per buyer instruction

# Sundeck size: Standard size or as per buyer instruction

# Rear deck Size: Standard size or as per buyer instruction

# On bottom removable wooden floor, vertical door made by Teak wood

# Engine box Made Polyester but top side Teak wood (ISOLATED)

# Wheel Stand Made by polyester

# Cool Box made by Polyester but top side wood (in front of engine box)

# Sundeck Made By polyester but top side Teak wood

# Rear Deck Made by polyester but top side teak wood,

# Seat made by Polyester but top side Teak wood

# Teak wood side & top side of the boat edge

# Box under Sundeck

# Box under rear Deck

# Boxes under seat for Battery, Fuel Tank & another 4 Boxes (opening 2/2 inside/ top side) for some thing else with Lock & keys

# Inside & outside of the boat well sanded & painted: color as per buyer instruction

# Pillows on sundeck, rear deck & seating area .Fabric- as per buyer instruction

# Build lead time- 45 days

# Packing-seaworthy packing by 40ft HC Container

TEAK- D

Boat Size-6 Meter to 8 Meter, ( Model boat principle dimension 7.5 x 2.8 x 1.2 Meter & Engine Volvo penta , HP-60) ) including engine,SABB/LISTER/BUKH/VOLVO PENTA DIESEL ENGINE, HP- 30,  Reverse gear, Cooling-water cool, Starting-Electrical starting system(sanded, painted & fully working condition) Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Polished propeller

# Stainless steel steering wheel or combined wheel (stainless steel & wood) with manual cable

# Seat high from Ground: Standard or as per buyer instruction

# High of Back- Standard or as per buyer instruction

# Sundeck size: Standard size or as per buyer instruction

# Rear deck Size: Standard size or as per buyer instruction

# Cool Box size- Standard

# On bottom removable wooden floor, vertical door made by Teak wood

# Engine box Made Polyester but top side Teak wood (ISOLATED)

# Wheel Stand Made by polyester

# Cool Box made by Polyester but top side wood or as per buyer instruction

# Sundeck Made By polyester but top side Teak wood

# Rear Deck Made by polyester but top side teak wood,

# Seat made by Polyester but top side Teak wood

# Teak wood side & top side of the boat edge.

# CABIN under Sundeck & Toilet option under Sundeck ( door top side opening)

# Box under rear Deck

# Box for Battery Made by polyester but top side teak wood ( in front of engine Box)

# Boxes under seat for Fuel Tank, 2 x cool box top side opening &  another 4 Boxes ( inside opening) for some thing else with Lock & keys

# Inside & outside of the boat well sanded & painted: color as per buyer instruction

# Pillows on sundeck, rear deck & seating area .Fabric- as per buyer instruction

# Build lead time- 45 days

# Packing-seaworthy packing by 40ft HC Container

Extra option

# Battery- 12 volts @ US $ 300.00 each

# Electric wiring- @ US $ 200.00  for Cool Box, Navigation light, Led Light &  Speaker or as per requirement

# Design Rope @ US $ 450.00 each Boat

# RVS mooring clamp- @ US $ 25.00 each

# RVS Rail @ US $ 175.00 each

# RVS Stair @ US $ 200.00

# RVS Stair & Stand up @ 500.00

# Manual Bilge pump @ US $ 50.00 each

# Automatic Bilge pump @ US $ 225.00 each

# Boat cover @ 450.00 (Removable Frame made by RVS, Used only laying period)

# Bimini top @ US $ 850.00 each (Frame Made by RVS)

# Boat Hood @ US $ 1,500.00 (Frame made by RVS)

# Boat Hood & Boat covers @ US $ 1900.00 (Frame made by RVS)

POLY-C

Boat Size-6 Meter to 8 Meter, ( Model boat principle dimension 7.3 x 2.4 x 1.0 Meter & Engine BUKH, HP-24) including engine,SABB/LISTER/BUKH/VOLVO PENTA DIESEL ENGINE, HP- 30, Reverse gear, Cooling-water cool, Starting-Electrical starting system(sanded, painted & fully working condition) Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Polished propeller

# Stainless steel steering wheel or combined wheel (stainless steel & wood) with manual cable

# Seat high from Ground: Standard or as per buyer instruction

# High of Back- Standard or as per buyer instruction

# Sundeck size: Standard size or as per buyer instruction

# Rear deck Size: Standard size or as per buyer instruction

# Cool Box Size-standard or as per buyer instruction

# On bottom removable wooden floor, vertical door made by wood

# Engine box Made Polyester (Isolated)

# Wheel Stand Made by polyester

# Sundeck Made By Polyester

# Rear Deck Made by Polyester,

# Seat made by Polyester 

# Box Under Sundeck

# Box under rear Deck

# Boxes under seat for Battery, Fuel Tank, cool box ( opening top side) & another 2 ( opening Top side) Box for some thing else with Lock & keys

# Inside & outside of the boat well sanded & painted: color- as per buyer instruction

# Pillows on sundeck, rear deck & seating area .Fabric- as per buyer instruction

# Build lead time- 45 days

# Packing-seaworthy packing by 40ft HC Container

Boat size 6 meter to 8 Meters(Model Boat 7.3 Meter), Engine-YANMAR DIESEL ENGINE, HP- 20, (Engine LISTER, SABBDIESEL, BUKH, VOLVO PENTA, HP: 30) Reverse gear, Cooling-water cool, Starting-Electrical starting system(sanded, painted & fully working condition), Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Polished propeller

# combined wheel (stainless steel & wood) with Manual Cable

# Seat high from Ground- Standard

# High of Back- - Standard

# Sundeck size- Standard

# Rear deck Size- Standard

# Side & Topside Of The Boat Edge made by MEHOGANI/TEAK WOOD

# On bottom removable wooden floor, made by TEAK WOOD

# Engine box Made by Polyester (Isolated) BUT TOP SIDE TEAK WOOD

# Wheel Stand Made by polyester BUT TOP SIDE TEAK WOOD

# Sundeck Made By Teak wood same as seat label

# Rear Deck Made by Polyester, (REAR DECK EDGE LABEL) But Top Side Teak wood

# Seat made by Polyester BUT TOP SIDE TEAK WOOD & Small seat Both side of Engine Box due to easy access into the Boat

# SEAT FOR DRIVER INFRONT OF REAR DECK MADE BY POLYESTER BUT TOP SIDE TEAK WOOD

# Box under Sundeck (Door Top Side OPENING slide Backwards & inside door, OPENING inside  

# Box under rear Deck (DOOR TOP SIDE OPENING)

# Boxes under seat for Battery, Fuel Tank, 2 x Tool box with 12 Volt Socket and  other four Boxes for something else, opening top side.

# HIDDEN BOX WITH LOCK & KEY DUE TO STORAGE NECESSARY DOCUMENTS

# Colour: Inside- & outside as per buyer chosen colour

# Pillows on sundeck, rear deck & seating area .Fabric as per buyer chosen colour

# Build lead time- 55 days

# Packing- seaworthy packing by 40ft HC Container

# Shipment- with in 5 days after receives the rest 50% payment

Boat Size- 7.3 including engine will be SABB DIESEL, VOLVO PENTA ,YAMNER DIESEL Reverse gear, Cooling-water cool, Starting-Electrical starting system (sanded, painted & fully working condition) Engine foundation, Engine Installation, Air & water exhaust system, Diesel fuel tank & fueling system, Grease filling nipple on propeller shaft, Proper screws will fit all the holes in the bottom. New rudder & rudder attachment points on the boat made by Stainless steel

# Electrical panel board, throttle fitted on wheel stand

# Design Rope as per rope example photo

# Bilge pump

# Polished propeller

# Stainless steel steering wheel Dia 1 Meter with manual cable

# Seat high from Ground: Standard or as per buyer instruction

# High of Back- Standard or as per buyer instruction

# Sundeck size: Standard size or as per buyer instruction

# Rear deck Size: Standard size or as per buyer instruction

# Cool Box Size-standard or as per buyer instruction

# On bottom floor & vertical door made by Polyester

# Engine box (Isolated) Made by Polyester But top side Wood Mahogany

# Wheel Stand Made by polyester

# Sundeck Made by Polyester

# Rear Deck Made by Polyester

# Seat made by Polyester

# Box under Sundeck

# Box under rear Deck

# Boxes under seat for Battery, Fuel Tank, cool box ( opening top side) & another 2 ( opening Top side) Box for some thing else with      Lock & keys

# Inside & outside of the boat well sanded & painted: color- Metallic Black (Inside & Out side)

# Pillows on sundeck, rear deck & seating area .Pillows height-10cm & Fabric- Dark Grey

# Navigation Light Front & Back site of the Boat & 4 X LED Light

# Boat cover Removable frame made by stainless steel used only laying period

# 1x Separate cover (exactly as on photo example, with Chain and RVS rings at bottom of cover),

# 4x Stainless steel points (2 at front sides and 2 at the back sides),

# 2x bars outside boat (exactly as on picture),

# 2x Pillows (dark grey) as on picture on stainless steel bar, one on each side of boat in middle

# Build lead time- 60 days

# Packing-seaworthy packing by 40ft HC Container

# Price @ US $ 11,500.00 each FOB, Chittagong, Bangladesh